6 Facts About Vehicles Everyone Thinks Are True

How to Choose the Right Coolant for Your Truck If you want to extend the life of your engine, it is important to use the right coolant. However, when it comes to trucks, you need to use special coolant for their engines. The coolant requirements for trucks is different from that of small cars due to the heavier load they carry. It is important to know the right engine coolant to use for your truck. You can ensure your engine won’t overheat or get damaged by using the right coolant. The Right Coolant for Your Truck There are many types of antifreeze or coolant that may work for your truck. The most common ones are propylene glycol and ethylene glycol. Ethylene glycol is very toxic and adequate safety measures should be taken if you intend to use it as your truck coolant. Make sure that the coolant is not allowed to drain into the water table. Most truckers use propylene glycol as a coolant since it is safer and recommended by the national authorities. Apart from being used in trucks, the coolant is used in aircraft de-icing foods and toiletries. However, just like is the case with ethylene glycol, the propylene glycol should not be allowed to drain into the water table.
5 Key Takeaways on the Road to Dominating Automobiles
It is important to ensure that the engine coolant and water are mixed in the same ratio. The mixture should not have less than 40 percent of water. Most car and truck owners think the main reason for using a coolant is to ensure the engine does not freeze. However, this is not the main function. The main work of the mixture is to ensure the boiling point temperature stays high while the freezing point temperature stays low. This function is more important. If you do not use the right coolant, corrosion and rust as well as cylinder wall cavitation can result. As a result, your engine may die.
5 Key Takeaways on the Road to Dominating Automobiles
Monitor the Freezing Point It is important to ensure that propylene glycol is in a higher concentration if you live in a cold climate region. The compound does not lower the freezing point effectively and this is what you should keep it in high concentration. If you live in a warm climate area, you will realize that propylene glycol transfers heat fast. If you will be hauling large loads over uneven terrains, this is the coolant you should use. Making the Right Mixture You should not use tap water to dilute concentrated engine coolant. The water can cause scaling of in the engine. Instead of faucet water, use distilled or de-ionized water to dilute the engine coolant. Majority of truck manufacturers recommend using pre-diluted coolant. To find the right coolant for your truck, it is important to research well. You can find the right coolant by following the tips above.